A PYPTEK all glass weed smoking pipe available in six anodized colors.

We’re going to go through:

  1. The Benefits

  2. How to Use It

  3. Pro Tips

  4. Cleaning

  5. Removing the Glass

The Pyptek Pocket design is carefully engineered to fuse all the benefits of a premium glass pipe with the durability of Aircraft-grade Aluminum. The Pocket construction delivers the authentic glass smoking experience you demand in one portable, rugged and easy to clean system. Available in six rich colors, this glass and metal pipe boasts exquisite geometry and aesthetics that distinguish it from any in its class. With three compatible concentrate kits the Pyptek Pocket redefines versatility in a market full of one-trick ponies.Product comes fully assembled and includes an extra o-ring as well as pipe cleaners. All products exoskeletons are anodized 6061 T-6 aircraft-grade aluminum surrounding a replaceable borosilicate glass tube protected by shock-absorbing rubber gaskets.The Pocket was designed to be a compact piece easy to take on the road. It’s super versatile because alongside being small it has the ability to house concentrate attachments too.Our Pocket like all of our pipes features an all glass smoking experience, it breaks down so it’s easy to clean, it has a screen that’s not under the flame so it’ll never effect the taste but blocks all those hot embers. Under the bowl there’s an expansion chamber to help with cooling your smoke, it has a medium carb for easy clearing. Its compact design has a comfortable grip.Recognized by High Times as the best glass smoking pipe, VICE has featured this all glass smoking piece as a key to a smoker-friendly vacationWhat’s in Your Pocket? an incredible, well-crafted experience you won’t regret purchasing.

Each piece in the PYPTEK Full Collection is created using individually machined parts and custom glass. Each pipe goes through several stages of development to ensure functionality and portability. There is little maintenance required as high-quality aircraft grade aluminum and borosilicate glass compile each piece. Just consider how machining, tumbling, anodizing, and laser etching and platinum labels bring these products to a new standard in the industry. We know you will not be disappointed. For more detail visit our design breakdown here.


Go ahead and fill your bowl with smoking material, cover the carb hole, light it up, and begin to inhale, then release the carb when you’re ready to clear your piece.PRO TIPSWith a larger bowl there is potential for the pipe to clog if you grind your smoking material too fine. In the event that your bowl piece does clog, avoid using tools as this can cause unrepairable damage. Simply turn your bowl upside down over the sink cover your carb hole and blow into the mouthpiece thorough the bowl to dislodge. Smoke your bowls thoroughly and ash them instead. Use a hemp wick for cleaner flavored hits.


It should only take you a few minutes if you clean your piece regularly. Please DO NOT use any acid based removers, yes even the orange cleaner many smoke shops sell. Although this works great for cleaning your glass, it will erode the anodized finish and could remove your platinum label. Instead follow these steps below.What you’ll need:Isopropyl alcohol, kosher salt, two zip lock freezer bags (to make sure the solution doesn’t leak anywhere), pipe cleaner or Qtips, paper towels.You’ll want to use a decent amount of kosher salt and isopropyl alcohol that is 99% proof, anything above 90% is best.


Unscrew the stem from the bowl piece counterclockwise and remove the screen and o-ring. Use a tool such as the back-end of a bic pen, to remove the glass from the mouth piece, it’s best to start on the side that attaches to the main body. Once you get past the first o-ring it should be easy to gently remove the glass insert with your hand.  Once the stem is disassembled you can tap the screen out. At this point, you push on the bowl from the bottom you can lift it out of the aluminum encasing. If your finger is too large use a soft tool. Soaking the parts in warm to hot water (recommended for 10 seconds) as well as using dawn dish soap will soften the o-rings for an easier removal.


Make sure the piece is submerged. Shake for 30 seconds, aggregate the materials, let soak for 20 to 30 minutes. Grab the piece, seal the bags, hot water to rinse. Use pipe cleaners or Qtips as needed, rinse well with hot. When putting the glass back in, go from the bottom up on the main body, get your glass fairly aligned before you go through the second and third o-rings. For the mouthpiece, just make sure you get the glass centered on the second o-ring before pushing it into place. Refill with cold water.Now you’re ready to smoke.
Add to cart